verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X125-40S

The AirTAC SEJ Adjustable Cylinder SEJ50X125-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 85–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke125 mm
  • Adjust window40 mm
  • Effective stroke85–125 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$101.39 $108.89Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X125-40S

The AirTAC SEJ50X125-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions, delivering an equal force of 825 N each way at 0.5 MPa. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback.

You can mechanically dial the retract end position over a 40 mm range, yielding an effective stroke of 85-125 mm. This stop-screw mechanism lets you fine-tune the exact end position directly on the machine without changing mounting hardware. The extruded aluminum barrel contains no external tie rods, and adjustable air cushions at both ends safely decelerate the load near stroke end.

Airtac SEJ Adjustable Cylinder SEJ50X125-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X125-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke125 mm
Adjustment window40 mm (85–125 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X125-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×125Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X125-40S Is Used

tune

Press Stroke Calibration

Dial in the exact 85-125 mm clamping reach on a assembly press. The equal 825 N both-way force ensures consistent pressure extending and retracting, while the 40 mm window allows perfect part alignment.

swap_horiz

Variable-Height Pallet Stops

Adjust the retract stop on a conveyor line to handle different pallet heights during changeover. The 40 mm adjustment window lets operators reposition the stop without swapping out the entire cylinder.

precision_manufacturing

Component Sealing Heads

Fine-tune the sealing head position on a packaging machine. The back rod allows a cam to trigger a DMSE electronic sensor, while the stop screw locks the precise end position for delicate 1154 N operations.

Is the Airtac SEJ Adjustable Cylinder SEJ50X125-40S the Right Cylinder?

Confirm the 40 mm adjustment window covers your required end-position variance, giving a true working stroke between 85 and 125 mm. If your application needs less force, stepping down to a 40 mm bore yields 528 N both ways at 0.5 MPa; if you need more clamping or lifting power, stepping up to a 63 mm bore provides 1402 N both ways at 0.5 MPa. If the end position never changes after commissioning, a fixed-stroke SED cylinder is sufficient.

For an ISO 15552 replacement, match the 50 mm bore, 125 mm nominal stroke, PT1/4 port, and your specific mounting choice from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable stop screw and air cushions only set the mechanical end and decelerate the load; a plain SEJ does not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X125-40S FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 40 mm. This gives an effective stroke range of 85-125 mm, allowing you to fine-tune the end position on the machine and lock it in place without changing hardware.

Because it is a double-rod cylinder, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X125-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X125-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.