
The AirTAC SEJ Adjustable Cylinder SEJ50X125-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 75–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 825 N each way at 0.5 MPa, preventing speed disparities between extend and retract motions. The effective stroke range is 75 to 125 mm.
You dial in the retract end position via a mechanical stop screw on the back rod, locking it after setting to achieve precise machine commissioning. Equipped with a magnet, it supports CMSE reed and DMSE electronic sensors for position feedback. It includes field-adjustable air cushions at both ends and uses a PT1/4 port with a Ø20 mm rod.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 50 mm (75–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying die heights, delivering 825 N of equal both-way force to clamp and release parts without repositioning hardware.
Fine-tune the 75 to 125 mm effective stroke on a flying cutoff saw, using the back-rod stop screw to set precise material lengths during machine commissioning.
Adjust the retract end position on the fly for different fill levels, leveraging the identical extend and retract speed to maintain a consistent dispensing cycle.
Confirm this 50 mm bore provides your required force: 825 N both ways at 0.5 MPa or 1154 N at 0.7 MPa. If your application demands less force, step down to the 40 mm bore (528 N at 0.5 MPa); if you need more, step up to the 63 mm bore (1402 N at 0.5 MPa). If your end position never varies, a fixed-stroke SED cylinder is sufficient. The adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. As an ISO 15552 cylinder, it dimensionally matches standard bore, stroke, and port placements for direct replacement.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke has a 50 mm adjustment window. The effective stroke can be dialed from 75 mm up to 125 mm, allowing you to fine-tune the end position mechanically without changing the cylinder hardware.
Because the rod exits both ends, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.