
The AirTAC SEJ Adjustable Cylinder SEJ50X130-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 30–130mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X130-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm mechanical stroke adjustment window. You can dial the retract end anywhere from 30 mm up to the 130 mm nominal stroke.
A stop screw on the back rod lets you set the precise end position on the machine, then lock it down. This unit lacks a magnet (-S), so it will not host CMSE or DMSE position sensors. It runs PT1/4 ports, a Ø20 mm rod, and adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X130-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 130 mm |
| Adjustment window | 100 mm (30–130 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to test various forming depths on aluminum blanks, utilizing the 825 N both-way force to strike consistently without retooling.
Adjust the end stop on the fly when switching between small and large carton flap heights, leveraging the equal push and pull force for reliable folding.
Fine-tune the exact 30 to 130 mm electrode contact point during robotic MIG fixture commissioning, locking the back-rod screw once the optimal gap is found.
This 50 mm bore fits neatly between the 40 mm (528 N at 0.5 MPa) and 63 mm (1402 N at 0.5 MPa) options, giving you 825 N both ways. If your load requires less force, step down to the 40 mm; if you need heavier clamping, move up to the 63 mm. The 100 mm adjustment window is massive—verify it covers your full range of part heights. If you never change positions after commissioning, a fixed-stroke SED saves complexity.
For ISO 15552 replacements, match the 130 mm stroke, 100 mm window, PT1/4 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that the air cushion and mechanical stop screw decelerate the load but do not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. For this model, you can adjust the effective stroke anywhere from 30 mm up to the full 130 mm nominal length, then lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.