
The AirTAC SEJ Adjustable Cylinder SEJ50X160-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 130–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X160-30S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas and an equal force of 825 N each way at 0.5 MPa. A stop screw on the back rod lets you mechanically dial the retract stroke up to 30 mm, giving an effective stroke range of 130-160 mm for precise machine commissioning.
This extruded-aluminum barrel unit features field-adjustable air cushions at both ends to manage deceleration. The -S magnet option supports CMSE reed and DMSE electronic sensors for position feedback. It uses a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and operates at speeds of 30-800 mm/s.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X160-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 30 mm (130–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 130-160 mm retraction stop on a PCB assembly press, using the 825 N both-way force to seat connectors without crushing delicate housings.
Adjust the stroke on the fly when a packaging line switches carton sizes, using the back-rod stop screw to match new flap-folding heights rapidly.
Set a precise divert gate end-position on a conveyor sorter, locking the 30 mm window after commissioning to ensure positive product routing.
Confirm this 30 mm adjustment window covers your required end-position variance. If you need less fine-tuning, a fixed-stroke SED50X160 is sufficient. If sizing force both ways: stepping down to bore 40 gives 528 N at 0.5 MPa, while stepping up to bore 63 yields 1402 N at 0.5 MPa. The adjustable air cushion decelerates the load near stroke end but is not a lock; this cylinder will not hold position on air loss, so use an external rod lock for fail-safe holding. As a dimensionally interchangeable ISO 15552 cylinder, match your replacement by bore, stroke, window, PT port, and mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke is mechanically adjustable via a stop screw on the back rod over a 30 mm window. The effective stroke range is 130 mm to 160 mm. You set the exact end-position on the machine and lock it down.
Because the rod exits both ends, the force is identical in both directions. It generates 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.