
The AirTAC SEJ Adjustable Cylinder SEJ50X185-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 165–185mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X185-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, yielding an effective stroke range of 165-185mm. A mechanical stop screw on the back rod lets you dial in the retract end position during commissioning without changing hardware mounts. Because the rod exits both ends, the annulus area is identical in both directions, delivering an equal force of 825N each way at 0.5MPa.
This extruded aluminum cylinder omits external tie rods for a clean profile and includes field-adjustable air cushions at both ends to decelerate the piston near stroke extremes. It uses a PT1/4 port and a Ø20mm rod with an M16x1.5 thread. Note that this specific SKU lacks a magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X185-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 185 mm |
| Adjustment window | 20 mm (165–185 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×185 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke precisely within the 165-185mm window to match varying carton sizes on a packaging conveyor, utilizing the 825N both-way force to push stops accurately.
Adjust the mechanical back-rod stop screw during product changeover to set exact press depths for different part heights, relying on the equal 1154N extend and retract force at 0.7MPa.
Use the 20mm stroke adjustment to test optimal clamping locations on a new machining jig, locking the stop screw once the perfect end position is found for the 50mm bore mechanism.
Verify that the 20mm adjustment window covers your required end-position variance. If you need less force, the adjacent bore down is 40mm, providing 528N both ways at 0.5MPa; if you need more power, step up to the 63mm bore, which yields 1402N both ways at 0.5MPa. If your application never requires stroke fine-tuning, a fixed-stroke SED cylinder provides the same double-rod rigidity more economically.
When replacing an ISO 15552 cylinder, match the 50mm bore, 185mm nominal stroke, PT1/4 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember that the air cushion and mechanical stop screw only set the end position and decelerate the load; they are not brakes. The SEJ does not hold position on air loss, so use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke by up to 20mm. This gives an effective stroke range of 165-185mm, allowing you to fine-tune the end position on the machine and lock it in place without swapping hardware.
Because the rod exits both ends, the force is identical in both directions: 825N at 0.5MPa, 1154N at 0.7MPa, and a maximum of 168kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.