
The AirTAC SEJ Adjustable Cylinder SEJ50X195-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 165–195mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X195-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 825 N each way at 0.5 MPa, eliminating speed discrepancies between extend and retract motions.
You can dial the retract end position up to 30 mm via a mechanical stop screw on the back rod, yielding an effective stroke range of 165 to 195 mm. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke end. This SKU has no magnet, so it does not support reed or electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X195-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 195 mm |
| Adjustment window | 30 mm (165–195 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×195 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 165-195 mm clamp stroke on a press brake during setup, using the 825 N both-way force to hold sheet metal precisely without retract speed drift.
Adjust the retract stop on the fly when a packaging line switches to a different carton height, saving downtime by avoiding physical cylinder swaps.
Trial position a copper weld tip against varying material thicknesses, using the equal double-rod force to maintain consistent electrode pressure.
The 30 mm adjustment window lets you fine-tune the end position during commissioning without swapping hardware. If your application requires less force, stepping down to the 40 mm bore yields 528 N both ways at 0.5 MPa. If you need more clamping power, the 63 mm bore provides 1402 N each way at 0.5 MPa. If your end position never varies, a fixed-stroke SED cylinder is sufficient.
This cylinder uses a PT1/4 port, a Ø20 mm rod with an M16x1.5 thread, and operates at 30-800 mm/s. The adjustable cushion decelerates the load near the end of travel but is not a mechanical lock; the cylinder will not hold position on air loss, so an external rod lock is required for fail-safe holding. As a dimensionally interchangeable ISO 15552 unit, it matches standard bore, stroke, and mounting footprints.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke can be dialed up to 30 mm via a stop screw on the back rod. The effective stroke range is 165 mm to 195 mm, which you set and lock mechanically on the machine.
Because a rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.