
The AirTAC SEJ Adjustable Cylinder SEJ50X20-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 10–20mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X20-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 825 N each way at 0.5 MPa. A stop screw on the back rod lets you mechanically dial the retract stroke down by 10 mm, giving an effective 10-20 mm range for precise end-position tuning.
Because the barrel is an extruded aluminum profile, it carries no external tie rods. The -S magnet enables CMSE reed or DMSE electronic sensors for position feedback, and field-adjustable air cushions at both ends manage deceleration near stroke limits.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X20-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 20 mm |
| Adjustment window | 10 mm (10–20 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm window to set exact die clearance during stamping commissioning, utilizing the 825 N both-way force for stable clamping.
Adjust retract stroke on the fly when switching carton sizes, using the equal push and pull forces to handle light product indexing securely.
Fine-tune the end position of a testing probe against a machined part, locking the back-rod stop screw precisely at the required 15 mm travel.
Verify the 10 mm adjustment window covers your required positioning range. If you need less force, the 40 mm bore delivers 528 N each way at 0.5 MPa; stepping up to the 63 mm bore provides 1402 N. If your stroke is fixed, a standard SED double-rod cylinder is sufficient. For replacing an ISO 15552 unit, match the 50 mm bore, 20 mm nominal stroke, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the air cushion and stop screw only set the mechanical end; they do not hold position on air loss.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke is adjustable up to 10 mm. The effective stroke range is 10 to 20 mm, allowing you to dial in the exact end position and lock the back-rod stop screw mechanically.
Because the rod exits both ends, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.