
The AirTAC SEJ Adjustable Cylinder SEJ50X20-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 0–20mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X20-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions. You dial the retract end from 0 to 20 mm via a stop screw on the back rod, letting you fine-tune the exact end position on the machine without changing hardware.
This 50 mm bore unit delivers 825 N each way at 0.5 MPa. It carries a PT1/4 port, a Ø20 mm rod with an M16x1.5 thread, and 30 mm adjustable air cushions at both ends. This SKU has no magnet, so it will not host CMSE or DMSE sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X20-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 20 mm |
| Adjustment window | 20 mm (0–20 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 0-20 mm retract stop to set precise press tool gaps, leveraging the 825 N both-way force for consistent clamping.
Adjust the mechanical end position on the fly when switching conveyor product heights, using the back-rod stop screw for rapid changeover.
Fine-tune the exact nozzle contact depth during machine commissioning, locking the 20 mm window screw once the optimal position is found.
Confirm this 20 mm adjustment window covers your positioning range; if you need a longer reach, the SEJ63X200-20 offers 1402 N at 0.5 MPa, while the smaller SEJ40X20-20 provides 528 N. If you need a fixed end stop without the back-rod adjuster, a standard SED fixed-stroke cylinder is simpler. For fail-safe load holding on air loss, note this cylinder does not lock; specify a BSED or an external rod lock. Match your ISO 15552 replacement by bore, stroke, port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke can be dialed up to 20 mm via a stop screw on the back rod, giving an effective stroke range of 0 to 20 mm. You lock the screw after setting the desired end position.
Because the rod exits both ends, force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.