
The AirTAC SEJ Adjustable Cylinder SEJ50X200-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X200-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions and yields an equal force of 825 N each way at 0.5 MPa. The retract end is mechanically adjustable via a stop screw on the back rod, letting you dial the effective stroke down from 200 mm to 100 mm without changing hardware.
This SKU lacks a magnet, so it will not work with CMSE or DMSE sensors. Adjustable air cushions at both ends decelerate the load near the stroke ends, but the stop screw is for end-position setting only; it is not a fail-safe lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X200-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to match varying part heights during press tool changeovers, delivering a consistent 825 N clamping force at 0.5 MPa.
Tune the end stop on a material feed mechanism to correct drift on the fly, using the equal 1154 N both-way force at 0.7 MPa to push and pull stock.
Avoid machining new hard stops during commissioning; turn the back-rod stop screw to find the exact 100-200 mm end position for your assembly jig.
The 100 mm adjustment window is ideal if you need to fine-tune a machine stop during commissioning or changeover, covering an effective stroke range of 100-200 mm. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, stepping up to the 63 mm bore yields 1402 N both ways. If you do not need to vary the stroke, a fixed-stroke SED50X200 saves complexity.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 200 mm nominal stroke, PT1/4 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). The plain SEJ does not hold position on air loss; for fail-safe holding, look to a BSED or an external rod lock.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract end is mechanically adjustable over a 100 mm window, meaning your effective stroke can be dialed from 100 mm up to the full 200 mm. You set the stop screw and lock it in place on the machine.
Because it is a double-rod cylinder, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.