
The AirTAC SEJ Adjustable Cylinder SEJ50X200-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X200-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 100mm adjustable stroke window. You can dial the retract end from 100mm up to 200mm, letting one unit cover a broad positioning range without changing hardware. A rod exits both ends, yielding equal force of 825N each way at 0.5MPa.
A stop screw on the back rod mechanically sets the end position, which you lock after fine-tuning. The extruded aluminum barrel has no external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke end. The built-in magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X200-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100mm retract window to set precise upper-die clearance on a 50-ton press, applying 1154N of equal both-way force at 0.7MPa to handle heavy stamping guides.
Adjust the stroke on the fly from 100 to 200mm when switching between varying box sizes on a packaging line, using the 825N at 0.5MPa to push diverter flaps.
Fine-tune the retract stop to 150mm during robotic welder commissioning, locking the back-rod screw to maintain exact tip contact pressure without hardware swaps.
Confirm this 100mm adjustment window covers your required end-position range. If you need less force, step down to the 40mm bore for 528N at 0.5MPa; if you need more, step up to the 63mm bore for 1402N at 0.5MPa. If your machine never requires stroke changes, a fixed-stroke SED cylinder is sufficient. For stroke lengths of 200mm or more, ensure external guides handle side loads to prevent rod binding. A plain SEJ does not hold position on air loss; use a BSED or external rod lock for fail-safe holding. When replacing an ISO 15552 unit, match the 50mm bore, 200mm stroke, PT1/4 port, and mounting style.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke within a 100mm window. The effective stroke ranges from 100mm to 200mm. You dial the end position on the machine and lock the screw in place.
Because a rod exits both ends, force is equal in both directions. It provides 825N at 0.5MPa, 1154N at 0.7MPa, and a maximum of 168kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.