
The AirTAC SEJ Adjustable Cylinder SEJ50X200-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 190–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X200-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 10 mm adjustable stroke window, letting you dial in the retract end from 190 to 200 mm. A rod exits both ends, yielding identical annulus areas so thrust is equal both ways at 825 N each direction at 0.5 MPa. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
A mechanical stop screw on the back rod sets the precise end position, which you lock after tuning. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end without acting as a fail-safe brake.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X200-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 10 mm (190–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm window to perfect the 825 N clamping position on a machining fixture, compensating for tooling wear without swapping hardware.
Adjust the retract end to match different carton heights on a packaging line, using the equal both-way force to push and pull the folding mechanism.
Fine-tune the 190 to 200 mm stroke range on a laboratory test rig to set exact contact pressure, leveraging the -S magnet for DMSE electronic sensing.
Confirm the 10 mm adjustment window covers your machine's required end-position variance. If you need less thrust, the 40 mm bore provides 528 N each way at 0.5 MPa; if you need more clamping power, step up to the 63 mm bore for 1402 N each way. If your application never requires stroke tuning, a fixed-stroke SED cylinder is simpler and sufficient.
For ISO 15552 replacements, match the 50 mm bore, 200 mm stroke, PT1/4 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the plain air cushion and stop screw do not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 10 mm stop-screw window lets you mechanically shorten the retract stroke from 200 mm down to 190 mm. You set the exact end position on the machine and lock the back rod in place.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.