verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X200-20S

The AirTAC SEJ Adjustable Cylinder SEJ50X200-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 180–200mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke200 mm
  • Adjust window20 mm
  • Effective stroke180–200 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$113.75 $121.25Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X200-20S

The AirTAC SEJ50X200-20S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A back-rod stop screw lets you dial the end position over a 20 mm window, yielding an effective 180-200 mm stroke range for precise machine commissioning without hardware swaps.

The extruded aluminum barrel contains no external tie rods, ensuring clean integration and ISO 15552 dimensional interchangeability. Equipped with a standard magnet, it supports CMSE reed and DMSE electronic sensors for exact positioning. Field-adjustable air cushions at both ends decelerate the load near stroke end, while the M16x1.5 rod thread handles mounting.

Airtac SEJ Adjustable Cylinder SEJ50X200-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X200-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke200 mm
Adjustment window20 mm (180–200 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X200-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×200Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X200-20S Is Used

precision_manufacturing

Palletizer Stop Finesse

Dial in the 825 N retract stop over the 20 mm window to perfectly halt varying pallet heights without re-engineering the machine frame.

settings

Press Clutch Commissioning

Fine-tune the 180-200 mm engagement position on an assembly press, locking the back-rod stop screw once the precise crush depth is achieved.

swap_horiz

Packaging Changeover

Adapt the cylinder end position for different carton sizes on a packaging line, utilizing the equal both-way force for consistent push and pull.

Is the Airtac SEJ Adjustable Cylinder SEJ50X200-20S the Right Cylinder?

Confirm this 20 mm adjustment window covers your required end-position range. If you need less force, the adjacent 40 mm bore provides 528 N both ways at 0.5 MPa; for heavier demands, the 63 mm bore steps up to 1402 N. If your end position never changes, a fixed-stroke SED cylinder is sufficient. Remember, the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, specify an external rod lock. For ISO 15552 replacement matching, verify the 50 mm bore, 200 mm stroke, PT1/4 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X200-20S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. You can adjust the effective stroke anywhere from 180 mm up to 200 mm, then lock the screw in place for precise end-position tuning.

Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X200-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X200-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.