
The AirTAC SEJ Adjustable Cylinder SEJ50X200-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 160–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X200-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, yielding equal annulus areas so the drive force is identical in both directions at about 825 N each way at 0.5 MPa. The built-in magnet supports CMSE and DMSE sensors.
By turning the stop screw on the back rod, you mechanically shorten the retract stroke, tuning the effective travel from 160mm up to 200mm. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the load near the end of travel.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X200-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 40 mm (160–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40mm window to fine-tune a 160-200mm material stop on a conveyor, using the equal 825 N both-way force to push and pull heavy sheet metal into the shear.
Switch between different carton heights on a packaging line by adjusting the retract end, avoiding hardware swaps while the double rod maintains stable 1154 N retraction force at 0.7 MPa.
Find the exact clamping depth on a machining fixture by sweeping the stroke window during trials, then lock the back-rod screw for repeatable 168 kgf maximum holding.
This 50mm bore gives 825 N both ways at 0.5 MPa. If your application requires less force, step down to the 40mm bore (528 N); if you need more push, step up to the 63mm bore (1402 N). The 40mm adjustment window is ideal for dialing in a precise end position during machine commissioning. If your stroke never varies, a fixed-stroke SED is sufficient.
The PT1/4 port and M16x1.5 rod thread match standard ISO 15552 hardware. The adjustable air cushion decelerates the load but does not lock it; a plain SEJ does not hold position on air loss, so use a BSED or external rod lock for fail-safe holding. Because the 200mm stroke exceeds 300mm, external guides are recommended to manage side loads.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 40mm, providing an effective stroke range of 160-200mm. You set the exact end position during commissioning and lock it in place.
Because the rod exits both ends, the annular area is identical in both directions. It generates 825 N both ways at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.