
The AirTAC SEJ Adjustable Cylinder SEJ50X200-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 125–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X200-75S is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window. You can dial the retract end from 125 mm up to 200 mm, letting one unit cover a range of end positions without swapping hardware. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal force of 825 N each way at 0.5 MPa.
A stop screw on the rear rod mechanically sets the retract limit—simply dial it in and lock it down for precise machine commissioning. This 50 mm bore uses a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and includes a magnet for CMSE or DMSE sensors. The extruded aluminum barrel carries adjustable air cushions at both ends to manage deceleration.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X200-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 75 mm (125–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75 mm retract window to precisely set a 125-200 mm pressing depth on assembly fixtures, leveraging the equal 825 N both-way force at 0.5 MPa.
Quickly adjust the mechanical stop to accommodate different carton heights on a packaging line without changing out the entire cylinder hardware.
Verify the 75 mm adjustment window covers your required positioning range. If you need less force, stepping down to the 40 mm bore provides 528 N at 0.5 MPa; if you need more thrust, stepping up to the 63 mm bore yields 1402 N at 0.5 MPa. If your end position never changes, a fixed-stroke SED saves complexity. Remember that the air cushion and stop screw only set the mechanical end and decelerate near stroke end—they do not hold position on air loss. For fail-safe holding, use an external rod lock.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 200 mm nominal stroke, 75 mm window, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. At 200 mm stroke the M16x1.5 rod handles moderate side loads, but always use external guides to prevent binding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke. The 75 mm window means the effective stroke can be dialed from 125 mm up to the full 200 mm, which is ideal for fine-tuning end positions on the machine.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.