
The AirTAC SEJ Adjustable Cylinder SEJ50X25-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X25-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is perfectly balanced at 825 N each way at 0.5 MPa. You can dial the retract end from 5mm up to the 25mm nominal stroke.
A stop screw on the back rod mechanically sets the end position, which you lock after tuning. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the load near stroke ends. This unit has no magnet, so it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X25-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 5-25mm stroke to clamp delicate electronic components precisely, utilizing the 825 N both-way force without overshooting.
Fine-tune the retract stop to match varying package sizes on a packaging line, locking the back-rod screw once the gate angle is set.
Use the adjustable end-position to test different liquid dispense volumes, relying on the equal push and pull forces for stable actuation.
Verify the 20mm adjustment window covers your required 5-25mm travel range for fine-tuning on the machine. If you need less force, the 40mm bore provides 528 N both ways at 0.5 MPa; if you need more, step up to the 63mm bore for 1402 N. A fixed-stroke SED cylinder is sufficient if you do not need variable end-positioning. For fail-safe holding on air loss, use an external rod lock, as the cushion and stop screw are not brakes. This ISO 15552 dimensionally interchangeable cylinder uses a PT1/4 port and M16x1.5 rod thread.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract end features a mechanical stop screw that allows you to dial the effective stroke within a 20mm window, giving an adjustable range of 5mm to 25mm. You lock the screw after setting the exact position.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.