
The AirTAC SEJ Adjustable Cylinder SEJ50X25-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X25-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window, yielding an effective travel of 5-25mm. A rod exits both ends, providing equal force at 825 N each way at 0.5 MPa. This symmetry ensures balanced velocity and thrust for precision tasks.
You dial in the retract end via a stop screw on the back rod, locking it after setting the exact machine position. The extruded aluminum barrel omits external tie rods, and the -S magnet supports CMSE reed and DMSE electronic sensors for end-of-stroke detection.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X25-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 5-25mm travel precisely to match varying part heights during robotic gripper changeover, utilizing the 825N both-way force for stable clamping.
Fine-tune the exact end-stop for inserting bearings or pins, locking the back rod once the 1154N at 0.7 MPa thrust is perfectly aligned.
Adjust the retract distance on the fly during machine commissioning to dial in the exact flap angle for diverting packages.
Confirm the 20mm adjustment window covers your positioning range. If you need less thrust, the 40mm bore provides 528 N both ways at 0.5 MPa; if scaling up, the 63mm bore offers 1402 N. For fixed travel without fine-tuning, the SED fixed-stroke cylinder is sufficient.
This plain SEJ does not hold position on air loss; the adjustable cushion decelerates near stroke end but is not a brake. For fail-safe holding, use an external rod lock. Ensure your ISO 15552 replacement matches the 50mm bore, 25mm nominal stroke, PT1/4 port, and magnet.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20mm. The effective stroke range is 5-25mm, which you lock in place after finding the exact end position.
Because the rod exits both ends, the annulus area is identical in both directions. It delivers 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.