
The AirTAC SEJ Adjustable Cylinder SEJ50X250-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X250-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window, letting you dial the retract end from 150 to 250 mm. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 825 N each way at 0.5 MPa. The extruded aluminum barrel has no external tie rods.
You set the retract position via a stop screw on the back rod, then lock it to fine-tune the machine end point without swapping hardware. This SKU ships without a magnet, so it does not support CMSE or DMSE position sensors. It carries a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and field-adjustable air cushions at both ends to decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X250-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to accommodate different part heights on a press line. The 825 N both-way force securely retracts the tooling without favoring the extend stroke.
Adjust the end position on the fly to sort varying package sizes on a conveyor. The double-rod design ensures the 1154 N retract force at 0.7 MPa matches the push force for consistent diverting.
Fine-tune the 150 to 250 mm effective stroke during R&D commissioning. Lock the back-rod stop screw precisely where the prototype fixture needs to seat without machining new spacers.
Verify the 100 mm adjustment window covers your positioning range, giving an effective 150 to 250 mm stroke. For sizing both ways, the 40 mm neighbor bore provides 528 N both-way force at 0.5 MPa, while the 63 mm bore jumps to 1402 N. If you do not need variable stops, a fixed-stroke SED saves length and complexity. A plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate, so specify a BSED or external rod lock for fail-safe holding. Because the 250 mm stroke exceeds 300 mm is false here, but at 250 mm you should still ensure external guides handle side loads to protect the 20 mm rod. To match an ISO 15552 replacement, confirm the 50 mm bore, 250 mm nominal stroke, 100 mm window, PT1/4 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you dial the retract stroke over a 100 mm window. The effective stroke ranges from 150 mm up to the full 250 mm, allowing you to fine-tune the end position on the machine and lock it in place.
Because it is a double-rod cylinder, force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.