
The AirTAC SEJ Adjustable Cylinder SEJ50X250-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X250-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This yields an equal force of 825 N each way at 0.5 MPa, making it ideal for balanced push-pull cycles. The effective stroke range is 150-250 mm.
You dial in the retract end position via a stop screw on the back rod, then lock it mechanically. This cylinder includes a magnet for CMSE (reed) or DMSE (electronic) sensors. It features field-adjustable air cushions at both ends to decelerate the load near stroke end, operating at speeds of 30-800 mm/s.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X250-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stop up to 100mm to match exact material thicknesses in a press, utilizing the 825N both-way force for balanced clamping and release.
Adjust the effective stroke between 150-250mm to handle different part heights on a conveyor line without swapping hardware.
Fine-tune the mechanical end stop during machine commissioning to find the perfect contact point before locking the back-rod screw.
This 50mm bore provides 825 N both ways at 0.5 MPa. If you need less force, step down to the 40mm bore (528 N both ways); for heavier cycles, step up to the 63mm bore (1402 N both ways). The 100mm adjustment window is excellent for commissioning fine-tune end positions. If you do not need variable stops, a fixed-stroke SED is enough. For fail-safe position holding on air loss, use a BSED or external rod lock. Since the stroke is 250mm, use external guides to prevent side-loading. It is dimensionally interchangeable per ISO 15552 with PT1/4 ports and an M16x1.5 rod thread.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The SEJ50X250-100S has a 100mm adjustment window, letting you set the effective retract stroke anywhere from 150mm to 250mm using a stop screw on the back rod.
Because it is a double-rod cylinder, force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.