verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X250-20S

The AirTAC SEJ Adjustable Cylinder SEJ50X250-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 230–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke250 mm
  • Adjust window20 mm
  • Effective stroke230–250 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$122.33 $129.83Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X250-20S

The AirTAC SEJ50X250-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, yielding an effective travel range of 230 to 250mm. A rod exits both ends, meaning the annulus area is identical in both directions.

You dial in the exact retract end-position using a mechanical stop screw on the back rod, then lock it down during machine commissioning. The extruded aluminum barrel has no external tie rods, and the -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends absorb kinetic energy near stroke end, protecting your tooling.

Airtac SEJ Adjustable Cylinder SEJ50X250-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X250-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke250 mm
Adjustment window20 mm (230–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X250-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×250Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X250-20S Is Used

precision_manufacturing

Press Tooling Setup

Dial the 20mm retract window to precisely match varying material thicknesses before locking the stop, using the equal 825N both-way force to clamp parts securely.

swap_horiz

Changeover Diverter

Adjust the effective stroke between 230mm and 250mm to route different carton sizes on a packaging line, leveraging the double-rod design for symmetrical speed.

tune

Sensor Flag Calibration

Mount a detection cam on the rear rod and fine-tune the exact extend position against a hard stop, relying on the -S magnet for DMSE electronic confirmation.

Is the Airtac SEJ Adjustable Cylinder SEJ50X250-20S the Right Cylinder?

Verify the 20mm adjustment window safely covers your end-position tuning range. If you need less force, stepping down to the 40mm bore provides 528N both ways at 0.5MPa; if your application demands more thrust, stepping up to the 63mm bore yields 1402N each way at 0.5MPa. Because the nominal stroke is 250mm, ensure external guides support the load to prevent side-loading wear on the 20mm rod and M16x1.5 threads.

If your process never requires stroke changes after setup, a fixed-stroke SED cylinder provides the same double-rod action more simply. Note that the adjustable stop screw and air cushions decelerate the load but do not hold position pneumatically; for fail-safe locking on air loss, specify a BSED or an external rod lock. This PT1/4 ported cylinder is dimensionally interchangeable per ISO 15552.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X250-20S FAQ

A mechanical stop screw on the rear rod lets you dial the retract stroke over a 20mm window. The effective stroke range is 230 to 250mm. You set the exact end-position during commissioning and lock the screw in place.

Because it is a double-rod cylinder, force is identical in both directions. It provides 825N at 0.5MPa, 1154N at 0.7MPa, and a maximum of 168kgf at 1.0MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X250-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X250-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.