
The AirTAC SEJ Adjustable Cylinder SEJ50X250-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 220–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X250-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. You can dial the retract end from 220mm up to 250mm, letting you fine-tune the end position directly on the machine without swapping hardware. A rod exits both ends, yielding equal force in both directions at 825 N each way at 0.5 MPa.
The extruded aluminum barrel contains no external tie rods, and the included magnet (-S) supports CMSE reed or DMSE electronic sensors for precise position feedback. Adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X250-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 30 mm (220–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Adjust the retract stroke from 220 to 250mm to accommodate different carton heights on a packaging line without changing cylinder hardware.
Use the equal both-way force and DMSE electronic sensor feedback to trial-position a welding head at varying material offsets.
Verify the 30mm adjustment window covers your required positioning range. If you need less force, the 40mm bore provides 528 N both ways at 0.5 MPa; if you need more, step up to the 63mm bore for 1402 N. If the stroke never needs tuning, a fixed-stroke SED saves space. Note that the air cushion and stop screw decelerate the load but do not lock it; for fail-safe position holding on air loss, use an external rod lock.
With a 250mm stroke, guide external loads to prevent side-loading on the M16x1.5 rod threads. To match this ISO 15552 cylinder for a direct replacement, confirm the 50mm bore, 220-250mm effective range, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 30mm. The effective stroke range is 220-250mm. You dial in the exact end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.