verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X250-50

The AirTAC SEJ Adjustable Cylinder SEJ50X250-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 200–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke250 mm
  • Adjust window50 mm
  • Effective stroke200–250 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$118.61 $126.11Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X250-50

The AirTAC SEJ50X250-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 825 N each way at 0.5 MPa. You can dial the retract end from 200 mm up to 250 mm to perfectly match a mechanical stop.

This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length. Because this specific SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensing without modification. The PT1/4 ports and M16x1.5 rod thread match standard ISO 15552 mounting dimensions.

Airtac SEJ Adjustable Cylinder SEJ50X250-50 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X250-50
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke250 mm
Adjustment window50 mm (200–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X250-50

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×250Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X250-50 Is Used

precision_manufacturing

Machining Clamp Tuning

Dialing in the exact 200-250 mm clamp position on a machining fixture to compensate for part tolerances, utilizing the 825 N both-way force to secure the workpiece.

swap_horiz

Packaging Changeover

Adjusting the retract stroke on the fly when a packaging line switches to a different carton height, saving hardware swaps while pushing with 1154 N at 0.7 MPa.

conveyor_belt

Variable Stop Positioning

Setting a precise mechanical stop on a conveyor sorting station, allowing operators to fine-tune the 200-250 mm end point without reprogramming the controller.

Is the Airtac SEJ Adjustable Cylinder SEJ50X250-50 the Right Cylinder?

This 50 mm bore gives 825 N both-way force at 0.5 MPa. If your load requires less thrust, step down to the 40 mm bore for 528 N; if you need more power, step up to the 63 mm bore for 1402 N. If you do not need to fine-tune the end position on the machine, a fixed-stroke SED cylinder provides the same equal-force action without the adjustment hardware.

The 50 mm adjustment window lets you cover a 200-250 mm range with one unit, which is excellent for part changeovers. Since the 250 mm stroke is 300 mm or below, standard mounting is generally fine, but always support external guides for high side loads. Remember that the adjustable cushion and stop screw decelerate the piston and set the mechanical end, but they do not hold position on air loss; for fail-safe holding, consider an external rod lock. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X250-50 FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. You can dial the effective stroke anywhere from 200 mm up to 250 mm, then lock the screw in place for precise end-position tuning on the machine.

Because it is a double-rod cylinder, the force is identical in both extend and retract directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X250-50

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X250-50 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.