
The AirTAC SEJ Adjustable Cylinder SEJ50X30-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 20–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X30-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable retract stroke. A stop screw on the back rod lets you dial in the end position over a 10mm window, yielding an effective stroke range of 20-30mm. This is ideal for precise commissioning and fine-tuning a mechanical stop directly on the machine.
Because a rod exits both ends, the annular area is identical in both directions. The output force is perfectly equal extend and retract, delivering 825 N each way at 0.5 MPa. This unit includes a magnet for CMSE reed and DMSE electronic sensors, and uses adjustable air cushions at both ends to decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X30-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 10 mm (20–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 825N of equal both-way force, dial the retract stop down 10mm to perfectly seat a bearing without over-pressing during machine commissioning.
Adjust the 20-30mm effective stroke on the fly to accommodate different part heights on a conveyor line without swapping out cylinder hardware.
Verify the 10mm adjustment window covers your positioning range, allowing the 30mm nominal stroke to be fine-tuned down to 20mm. If your application needs less force, the neighboring 40mm bore provides 528 N both ways at 0.5 MPa; if you need more thrust, step up to the 63mm bore for 1402 N both ways. If the stroke never needs adjustment, a fixed-stroke SED cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock or BSED. This ISO 15552 unit is dimensionally interchangeable by confirming the 50mm bore, 20-30mm stroke range, PT1/4 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract end features a stop screw on the back rod that shortens the stroke over a 10mm window. The effective stroke range is 20 to 30mm, which you set and lock on the machine.
Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.