
The AirTAC SE50 Standard Cylinder SE50X30 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 30mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X30 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. With a 50 mm bore and 30 mm stroke, it uses a PT1/4 port and a 20 mm hard-chrome plated rod to drive compact automation sequences.
Because it features a square extruded aluminum barrel without external tie rods, the body is highly resistant to corrosion and mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, ensuring smooth stops even in rapid cycling. Note this SKU lacks a built-in magnet, so it is not ready for CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X30 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push and short 30 mm travel needed to snap corrugated carton blanks open in high-speed packaging lines.
Drives the short, forceful 30 mm ejection stroke to strip molded plastic parts from the cavity, utilizing its adjustable cushion for gentle part release.
Actuates short-stroke clamping or positioning arms on metal forming equipment, where the hard-chrome 20 mm rod resists side loads during rapid positioning.
If 982 N of push is excessive for your payload, stepping down to a 40 mm bore yields 628 N at 0.5 MPa, saving space. Conversely, if you require more thrust, the 63 mm bore provides 1559 N at 0.5 MPa. As a true ISO 15552 cylinder, this unit is dimensionally interchangeable with other ISO 15552 profile cylinders, making it a seamless retrofit for existing setups using a PT1/4 port and standard mounting accessories. Remember that the adjustable air cushion only decelerates the piston near the stroke end; it is not a locking mechanism, so loads will drift if air pressure is lost.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X30 delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE50X30 shares the standardized ISO 15552 / VDMA 24562 mounting dimensions, making it a direct replacement for any cylinder built to the same profile standard. You can reuse existing FA, FB, or TC mounting hardware without redrilling.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.