
The AirTAC SEJ Adjustable Cylinder SEJ50X30-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 10–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X30-20 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and an equal drive force of 825 N each way at 0.5 MPa. The integrated stop screw on the back rod provides a 20 mm adjustment window, allowing you to dial the effective stroke down from 30 mm to a 10 mm minimum.
Because the retract end is mechanically adjustable, you can fine-tune the exact end position directly on the machine without swapping hardware. This extruded aluminum barrel profile cylinder features field-adjustable air cushions at both ends to decelerate the load near stroke end. Note that this SKU lacks a magnet, so it will not work with CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X30-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 20 mm (10–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
When switching a packaging line to a different carton height, use the 20 mm retract window to precisely dial in the new 10 to 30 mm end stop without disassembling the tooling.
Adjust the retract stroke on the fly to match varying part dimensions, ensuring the ejector pushes components the exact distance required every time.
Verify the 20 mm adjustment window covers your required positioning range. If you need less force, the adjacent 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, the 63 mm bore offers 1402 N both ways. If your end position never varies, a fixed-stroke SED cylinder is a simpler choice.
This cylinder uses a PT1/4 port and a 20 mm rod with an M16x1.5 thread. The adjustable air cushion decelerates the load near the ends but does not lock the rod; for fail-safe position holding on air loss, use an external rod lock. When replacing an ISO 15552 unit, match the 50 mm bore, 30 mm stroke, 20 mm window, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke adjusts over a 20 mm window via a stop screw on the back rod. The effective stroke range is 10 mm to 30 mm, which you set and lock during machine commissioning.
Because it is a double-rod cylinder, the force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.