
The AirTAC SEJ Adjustable Cylinder SEJ50X300-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 200–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X300-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 825N each way at 0.5 MPa, preventing speed discrepancies between extend and retract motions.
You can dial the retract end position up to 100mm via a stop screw on the back rod, yielding an effective stroke range of 200-300mm. The extruded aluminum barrel contains no external tie rods. It includes field-adjustable air cushions at both ends and a built-in magnet for CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X300-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 100 mm (200–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 300mm retract back by 100mm to precisely meet varying box flap heights, utilizing the 825N both-way force to securely push and pull the alignment mechanism.
Fine-tune the 200-300mm effective stroke on the machine during commissioning to hit exact riveting depths without swapping hardware, locking the back-rod screw once set.
Shift the mechanical end stop across the 100mm window to accommodate new part geometries on a machining line, relying on the equal extend and retract speeds for smooth indexing.
Confirm the 100mm adjustment window covers your required end-position variance. If 825N at 0.5MPa is excessive, the next bore down (40mm) yields 528N; if insufficient, step up to the 63mm bore for 1402N. A fixed-stroke SED is adequate if no on-machine fine-tuning is needed. For any stroke at or above 300mm, use external guides to prevent rod side-loading. The air cushion decelerates near stroke end but does not lock; use a BSED or external rod lock for fail-safe position holding. Ensure your ISO 15552 replacement matches the 50mm bore, PT1/4 port, and magnet option.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 100mm. The effective stroke range is 200-300mm, which you set and lock on the machine during commissioning.
Because the rod exits both ends, force is equal in both directions: 825N at 0.5MPa, 1154N at 0.7MPa, and a maximum of 168kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.