
The AirTAC SEJ Adjustable Cylinder SEJ50X300-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 270–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X300-30S is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas for equal force and speed in both directions. You can dial the retract end from 270 mm up to the 300 mm nominal stroke, perfect for dialing in an exact end position during machine commissioning. Output is 825 N each way at 0.5 MPa.
The rear rod features a mechanical stop screw to set the end position securely. It includes a -S magnet for CMSE reed or DMSE electronic sensors and adjustable air cushions at both ends. Because the stroke is 300 mm, external guides are recommended to counter side loads and prevent rod binding over the extended length.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X300-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 30 mm (270–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 270-300 mm retract position to set precise die contact on a 50 mm press, using the equal 825 N both-way force to seat parts without rebound.
Quickly adjust the cylinder end-stop to accommodate different package heights on a conveyor line, fine-tuning the stroke window without swapping hardware.
Fine-tune the exact shot position for an adhesive dispenser during commissioning, locking the rear stop screw once the optimal 270-300 mm range is found.
Verify the 30 mm adjustment window covers your required positioning range. If you need less force, the 40 mm bore provides 528 N at 0.5 MPa; if your load is heavier, step up to the 63 mm bore for 1402 N at 0.5 MPa. If you do not require field adjustment, a fixed-stroke SED50X300 is sufficient. The adjustable air cushion decelerates the load near stroke end but does not lock position; for fail-safe holding on air loss, use an external rod lock or BSED. Ensure your ISO 15552 replacement matches this 50 mm bore, 300 mm stroke, PT1/4 port, and magnet option.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 30 mm. The effective stroke range is 270 mm to 300 mm. You set the exact end position during commissioning and lock it in place.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.