
The AirTAC SEJ Adjustable Cylinder SEJ50X300-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 260–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X300-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end back, yielding an effective stroke range of 260 to 300mm without swapping hardware.
This extruded aluminum barrel omits external tie rods for a clean profile, and the included -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends absorb kinetic energy near stroke extremes, while the PT1/4 ports and M16x1.5 rod thread handle standard pneumatic connections.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X300-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 40 mm (260–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40mm retract window to match varying carton heights on a packaging line, using the equal 825N both-way force to push and pull folding flaps reliably.
Fine-tune the 260-300mm end position during CNC fixture commissioning, hitting a precise mechanical stop for bearing insertion without reprogramming motion controllers.
Act as an adjustable physical stop on a conveyor for mixed-product runs, extending the dual rods to halt pallets while the -S magnet flags DMSE sensors for arrival.
Verify the 40mm adjustment window covers your end-position tolerance, giving a precise 260-300mm stroke range. For sizing, the neighboring 40mm bore yields 528N both ways at 0.5 MPa, while stepping up to the 63mm bore provides 1402N. If your machine never requires stroke fine-tuning, a fixed-stroke SED saves complexity. Note that a plain SEJ does not hold position on air loss; the adjustable cushion only decelerates near stroke end, so specify a BSED or external rod lock for fail-safe holding.
At 300mm nominal stroke, the extended rod is susceptible to side loads. Mount external guides to prevent rod binding and premature seal wear. Confirm your ISO 15552 replacement matches the 50mm bore, PT1/4 port, and mounting style from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 40mm. This gives an effective stroke range of 260 to 300mm. You lock the screw after setting the exact end position needed on your machine.
Because it is a double-rod cylinder, force is equal in both directions. It provides 825N at 0.5 MPa, 1154N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.