verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X300-50S

The AirTAC SEJ Adjustable Cylinder SEJ50X300-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 250–300mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke300 mm
  • Adjust window50 mm
  • Effective stroke250–300 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$130.50 $138.00Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X300-50S

The AirTAC SEJ50X300-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. You can dial the retract end from 250 mm up to the nominal 300 mm, allowing precise on-machine end-position tuning without swapping hardware. A rod exits both ends, yielding identical force in both directions at 825 N each way at 0.5 MPa.

This unit includes a magnet for position sensing and uses an extruded aluminum barrel with no external tie rods. The retract stroke is set via a mechanical stop screw on the back rod; lock it after setting to maintain the exact position. Adjustable air cushions at both ends decelerate the load near stroke end, while the PT1/4 ports and M16x1.5 rod thread handle standard pneumatic connections.

Airtac SEJ Adjustable Cylinder SEJ50X300-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X300-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke300 mm
Adjustment window50 mm (250–300 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X300-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×300Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X300-50S Is Used

swap_horiz

Packaging Changeover

Dial the 50 mm retract window to match varying carton heights on a packaging line, using the 825 N both-way force to push flaps securely.

precision_manufacturing

Press Fit Tuning

Fine-tune the insertion depth of a bearing press during commissioning, adjusting the 250-300 mm effective stroke to dial in the exact seat pressure.

conveyor_belt

Variable Stop Positioning

Act as an adjustable mechanical stop on a conveyor, moving the 300 mm stroke end point to route different product families without reprogramming sensors.

Is the Airtac SEJ Adjustable Cylinder SEJ50X300-50S the Right Cylinder?

Verify the 50 mm adjustment window covers your required end-position range. If you need less force, the neighboring bore down is 40 mm providing 528 N both ways at 0.5 MPa; if you need more thrust, step up to the 63 mm bore providing 1402 N. If you do not need variable stops, a fixed-stroke SED cylinder is sufficient. Note that a plain SEJ does not hold position on air loss; the stop screw and cushions only set the mechanical end and decelerate, so use an external rod lock for fail-safe holding.

Because the nominal stroke is 300 mm, ensure external guides support the load to prevent side-loading on the rod. This cylinder is dimensionally interchangeable per ISO 15552; match the bore, stroke, 50 mm window, PT1/4 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2) for direct replacement.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X300-50S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 250-300 mm. You dial the end position during commissioning and lock the screw in place.

Because it is a double-rod cylinder, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X300-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X300-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.