
The AirTAC SEJ Adjustable Cylinder SEJ50X300-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 225–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X300-75S is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window, yielding an effective travel range of 225 to 300 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This delivers an equal output force of 825 N each way at 0.5 MPa, preventing speed asymmetry.
You dial in the exact retract end-position using a mechanical stop screw on the back rod, then lock it down for precise machine commissioning. Equipped with a standard magnet (-S), this extruded-aluminum cylinder supports CMSE reed and DMSE electronic sensors for mid-stroke position feedback. It features field-adjustable air cushions at both ends and PT1/4 ports.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X300-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 75 mm (225–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75 mm retract window to perfectly match material thickness changes on a coil feed line. The equal 825 N both-way force securely positions the stop without drift.
Swap carton sizes on a packaging machine by adjusting the effective stroke between 225 and 300 mm. The double-rod design maintains consistent 1154 N retract force at 0.7 MPa.
Fine-tune the approach depth of a welding head during setup. The back-rod stop screw locks the 300 mm nominal position exactly, while DMSE sensors confirm the extended state.
Verify the 75 mm adjustment window safely covers your required end-position variance. If you need less fine-tune travel, step down to the 40 mm bore, which provides 528 N of both-way force at 0.5 MPa. If your payload exceeds this 50 mm unit, step up to the 63 mm bore for 1402 N. If your machine never requires stroke adjustments, a fixed-stroke SED cylinder provides the same double-rod symmetry more simply.
Because the nominal stroke is 300 mm, external guides are recommended to manage rod side-load and prevent binding over the extended travel. Remember that the adjustable air cushion and mechanical stop screw decelerate the load and set the end-point, but a plain SEJ does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. For a direct ISO 15552 replacement, match the 50 mm bore, 300 mm nominal stroke, 75 mm window, PT1/4 port, and your required mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 75 mm. This gives you an effective stroke range of 225 to 300 mm, allowing you to fine-tune the end position on the machine and lock it in place without changing hardware.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.