
The AirTAC SEJ Adjustable Cylinder SEJ50X60-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 40–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X60-20S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 825 N each way at 0.5 MPa. The integrated -S magnet enables position tracking with CMSE reed or DMSE electronic sensors.
A stop screw on the back rod provides a 20 mm adjustment window, letting you dial the retract end from 40 to 60 mm for precise machine commissioning. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the 30-800 mm/s travel speed smoothly.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X60-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 20 mm (40–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 40-60 mm end position during setup. The stop screw provides 825 N of both-way force at 0.5 MPa for precise mechanical stops without changing hardware.
Adjust the retract stroke on packaging lines handling different box sizes. The 20 mm window accommodates varying heights while maintaining 1154 N both-way force at 0.7 MPa.
Use the adjustable end-stop to test clamping distances on assembly fixtures. The -S magnet works with DMSE sensors to verify the tuned position electronically.
This 20 mm window is ideal for fine-tuning a 40-60 mm end position during machine commissioning or matching a variable stop. If you need less force, the 40 mm bore provides 528 N each way at 0.5 MPa; if your load requires more, step up to the 63 mm bore for 1402 N each way at 0.5 MPa. A fixed-stroke SED is sufficient if your end position never changes.
The adjustable cushion only decelerates the piston near stroke end; it does not hold position on air loss. For fail-safe holding, use an external rod lock or BSED. As a dimensionally interchangeable ISO 15552 cylinder, match your replacement by 50 mm bore, 60 mm stroke, PT1/4 port, and magnet option. Because stroke is under 300 mm, side-load stress is minimal, but external guides are still recommended for heavy lateral loads.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The stop screw on the back rod provides a 20 mm adjustment window. You can dial the effective retract stroke from 40 mm up to the nominal 60 mm, allowing precise end-position tuning without swapping cylinders.
Because the rod exits both ends, force is identical in both directions. It delivers 825 N each way at 0.5 MPa, 1154 N each way at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.