
The AirTAC SEJ Adjustable Cylinder SEJ50X60-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 30–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X60-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is perfectly balanced at 825 N each way at 0.5 MPa. You can dial the retract end from 30mm up to the 60mm nominal stroke, letting one unit cover a precise positioning range without swapping hardware.
The rear rod uses a mechanical stop screw to set the end position, which you lock down after fine-tuning the machine. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for exact end-of-stroke detection. It features field-adjustable air cushions at both ends and a PT1/4 port.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X60-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 30 mm (30–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30mm retract window to match varying product heights on a pick-and-place unit, using the equal 825 N both-way force to lift and lower securely.
Fine-tune the mechanical end stop during metal forming commissioning, locking the rear rod screw once the 60mm maximum stroke position is dialed in perfectly.
Adjust the retract distance on the fly during packaging line changeovers, relying on the -S magnet and DMSE sensors to confirm the new shortened end position.
Verify the 30mm adjustment window safely covers your required retract distance, providing a 30-60mm effective range. If you need less force, stepping down to the 40mm bore yields 528 N at 0.5 MPa; if your load requires more thrust, stepping up to the 63mm bore provides 1402 N. If your end position never changes, a fixed-stroke SED cylinder is sufficient. For any fail-safe load holding on air loss, note this cylinder does not lock position—you need an external rod lock. Match ISO 15552 replacements by confirming the 60mm stroke, 30mm window, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke. For this SEJ50X60-30S, you can adjust the effective stroke anywhere from 30mm up to the 60mm nominal length, then lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.