
The AirTAC SEJ Adjustable Cylinder SEJ50X600-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 500–600mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X600-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and an equal force of 825 N each way at 0.5 MPa. You can dial the retract end from 500 to 600 mm to perfectly match a mechanical stop without changing hardware.
The extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensionally interchangeable footprint. A stop screw on the back rod sets the end position, which you lock after dialing in. Field-adjustable air cushions at both ends decelerate the motion near stroke end, while the integrated -S magnet pairs with CMSE reed or DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X600-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 600 mm |
| Adjustment window | 100 mm (500–600 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Apply 825 N of both-way force to push coil stock. Dial the 100 mm window to fine-tune the feed length during material changeovers without swapping cylinders.
Sort varying package sizes on a conveyor by adjusting the retract stroke between 500 and 600 mm to hit different divert positions on the fly.
Set trial end positions for component testing.
This 50 mm bore provides 825 N of both-way force at 0.5 MPa. If your load is lighter, step down to the 40 mm bore for 528 N; if heavier, step up to the 63 mm bore for 1402 N. For a fixed end position that never needs commissioning tweaks, a standard SED double-rod cylinder is sufficient. Because the 600 mm stroke invites side-load deflection, use external guides to support the rod and prevent binding.
When replacing an ISO 15552 unit, match the 500-600 mm effective range, PT1/4 port, and M16x1.5 rod thread. The SEJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. The air cushion decelerates the load but does not hold position on air loss; for fail-safe holding, specify an external rod lock.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 100 mm adjustment window allows you to dial the retract stroke from 500 mm up to 600 mm. You set the exact end position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.