
The AirTAC SEJ Adjustable Cylinder SEJ50X600-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 550–600mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X600-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable retract window, letting you dial the effective stroke precisely from 550 to 600mm. A rod exits both ends, yielding identical annular areas and equal force in both directions at 825 N each way at 0.5 MPa.
The built-in magnet supports CMSE reed and DMSE electronic sensors for end-position feedback. You set the final retract position via a stop screw on the back rod and lock it in place, which is ideal for fine-tuning a specific machine stop during commissioning without swapping hardware.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X600-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 600 mm |
| Adjustment window | 50 mm (550–600 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 550-600mm retract stroke to align the pusher precisely against varying bar stock lengths, using the 825N both-way force to feed material smoothly.
Adjust the retract stop on the fly to accommodate different carton widths during line changeover, ensuring the dual rods apply equal push and pull force.
Fine-tune the exact 550-600mm end position during R&D commissioning, locking the back-rod stop screw once the optimal sensor testing distance is found.
Verify the 50mm adjustment window covers your required end-position variance, giving an effective 550 to 600mm stroke. For sizing, the next bore down (40mm) yields 528 N both ways at 0.5 MPa, while stepping up to 63mm provides 1402 N. If you only need a fixed reach, a standard SED double-rod cylinder is sufficient. For replacement, match the 50mm bore, 600mm stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Because the 600mm stroke is long, use external guides to prevent rod side-loading. Note that the adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 50mm. The effective stroke range is 550 to 600mm. You dial in the exact end position for your machine and lock the screw.
Because the double-rod design yields equal annular areas, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, with a maximum of 168 kgf at 1.0 MPa. Operating speed is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.