verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X75-10S

The AirTAC SEJ Adjustable Cylinder SEJ50X75-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 65–75mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke75 mm
  • Adjust window10 mm
  • Effective stroke65–75 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$94.67 $102.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X75-10S

The AirTAC SEJ50X75-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical extend and retract annulus areas, so you get equal force both ways—about 825 N at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 10 mm window, giving an effective stroke range of 65 to 75 mm.

This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration near stroke end. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise position detection. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SEJ Adjustable Cylinder SEJ50X75-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X75-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke75 mm
Adjustment window10 mm (65–75 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X75-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×75Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X75-10S Is Used

precision_manufacturing

Packaging Stop Fine-Tuning

Dial in the exact 65-75 mm retract stop during machine commissioning to match varying carton sizes, utilizing the equal 825 N both-way force to push and pull reliably.

swap_horiz

Part Changeover Positioning

Quickly adjust the mechanical end position up to 10 mm when switching product heights on a packaging line, avoiding hardware swaps while maintaining 1154 N at 0.7 MPa.

science

Trial Clamping Station

Test clamping force and position on prototype assemblies by tweaking the stroke window, relying on the equal push/pull force and CMSE sensor feedback for validation.

Is the Airtac SEJ Adjustable Cylinder SEJ50X75-10S the Right Cylinder?

Confirm the 10 mm adjustment window covers your required end-position variance (65-75 mm effective stroke). If you need less force, the 40 mm bore provides 528 N at 0.5 MPa; if scaling up, the 63 mm bore offers 1402 N at 0.5 MPa. For fixed-retract applications without position tuning, a standard SED double-rod cylinder is sufficient.

The adjustable cushion and mechanical stop screw decelerate the piston and set the end point, but they do not hold position on air loss; for fail-safe holding, use an external rod lock. This 75 mm stroke is short enough that side-load risks are minimal, but always ensure the load is guided along the rod axis. When replacing an ISO 15552 cylinder, verify the 50 mm bore, 65-75 mm stroke window, PT1/4 port, and mounting subset.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X75-10S FAQ

The retract stroke is adjustable via a stop screw on the back rod over a 10 mm window, giving an effective stroke range of 65 to 75 mm. You lock the screw in place once the target end position is set.

Because the rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X75-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X75-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.