Airtac SED Double Rod Cylinder SED50X75
The AirTAC Airtac SED Double Rod Cylinder SED50X75 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø50mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 75mm, PT1/4 ports, adjustable cushioning.
- BoreØ50 mm
- Stroke75 mm
- Port sizePT1/4
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED50X75
The AirTAC SED50X75 is a double-acting, double-rod profile cylinder conforming to ISO 15552. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 825 N of thrust in both extend and retract directions at 0.5 MPa. This equal-force dynamic is ideal for symmetrical operations.
It features a 50 mm bore, a 75 mm stroke, and a PT1/4 port. The extruded aluminum barrel includes sensor grooves, but this specific SKU lacks the -S magnet option, so it does not support CMSE or DMSE position sensing. Adjustable air cushions at both ends protect your equipment near stroke extremes.
Airtac SED Double Rod Cylinder SED50X75 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED50X75 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED50X75
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED50X75 Is Used
Web Guiding
Drives opposing guide rollers in film lines. The 825 N equal both-way force ensures perfectly balanced tensioning without drift during direction reversals.
Multi-Spindle Drills
Mounts drill heads on both rod ends to machine two parts simultaneously. Twin-rod guidance prevents deflection under the 0.7 MPa 1154 N load.
Transfer Pushers
Pushes cartons between parallel conveyors. The rear rod end carries a cam to trigger a downstream diverter, streamlining packaging sequences.
Is the Airtac SED Double Rod Cylinder SED50X75 the Right Cylinder?
Choose this 50 mm bore when you need 825 N both ways at 0.5 MPa. If your payload is lighter, step down to the 40 mm bore (528 N both ways); for heavier loads, step up to the 63 mm bore (1402 N both ways). Unlike a single-rod SE cylinder, this twin-rod design provides superior anti-rotation resistance and allows mounting a cam or secondary mechanism on the rear rod end.
To replace an ISO 15552 unit, match the 50 mm bore, 75 mm stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that a plain SED drifts on air loss; the cushions only decelerate near stroke end. For fail-safe holding, use a BSED double-rod lock or external brake.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED50X75 FAQ
Because the double-rod design yields equal annulus areas, it outputs 825 N both ways at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
It accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. It omits FB, CA, CB, and CR styles. The double-rod design requires rear-rod clearance but offers better load guidance than a single-rod SE.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED50X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.