
The AirTAC SEJ Adjustable Cylinder SEJ50X75-20FTC is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 55–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X75-20FTC is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 825 N (0.5 MPa). By turning the mechanical stop screw on the back rod, you dial the retract end from 55 mm up to the nominal 75 mm.
This FTC-mounted unit uses a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread. Field-adjustable air cushions at both ends absorb kinetic energy near stroke end. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X75-20FTC |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 20 mm (55–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20 mm retract window to set a precise 65 mm lower dead center on a small forming press, using the equal 825 N both-way force to consistently seat the part.
Quickly reposition the retract stroke between 55 and 75 mm when switching carton sizes on a packaging line, avoiding mechanical hardware swaps.
Fine-tune the divert gate endpoint on a conveyor during commissioning, letting the double-rod geometry push and pull the flap with matching 1154 N at 0.7 MPa.
Verify the 20 mm adjustment window covers your end-position tolerance; here the retract stroke sets precisely from 55 to 75 mm. If you need less thrust, the 40 mm bore provides 528 N at 0.5 MPa; stepping up to the 63 mm bore yields 1402 N both ways. If your travel never changes after commissioning, a fixed-stroke SED saves complexity.
The adjustable cushion and stop screw decelerate the load but do not hold position on air loss; add an external rod lock for fail-safe clamping. Because this is an ISO 15552 profile cylinder, match the 50 mm bore, 75 mm stroke, PT1/4 port, and FTC mount for a direct dimensional replacement.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The mechanical stop screw on the rear rod lets you adjust the retract stroke over a 20 mm window. For this 75 mm nominal stroke model, the effective stroke range is 55 to 75 mm.
Because it is a double-rod cylinder, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.