
The AirTAC SEJ Adjustable Cylinder SEJ50X75-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 55–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X75-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable stroke window, yielding an effective travel range of 55 to 75 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This delivers an equal output force of 825 N each way at 0.5 MPa, preventing speed asymmetry during retraction.
You mechanically dial in the exact retract end-position using a stop screw on the back rod, then lock it down—ideal for machine commissioning. This -S variant includes a magnet for CMSE reed or DMSE electronic sensors. The extruded aluminum barrel has no external tie rods, and field-adjustable air cushions at both ends manage deceleration near the stroke limits.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X75-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 20 mm (55–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Adjust the mechanical stop screw on the back rod to accommodate different cardboard blank sizes on the fly without swapping out the entire cylinder assembly.
Fine-tune the trial insertion depth of a 50 mm dowel pin during machine commissioning, locking the back rod stop once the precise end-point is verified.
Verify the 20 mm adjustment window covers your required end-position variance. If you need less force, the adjacent 40 mm bore provides 528 N both ways at 0.5 MPa; stepping up to the 63 mm bore yields 1402 N. If your travel distance is permanently fixed and requires no end-tuning, a standard SED double-rod cylinder is sufficient.
For direct ISO 15552 replacement, match the 50 mm bore, 75 mm nominal stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and mechanical stop screw decelerate the load but do not hold position on air loss; a fail-safe rod lock is required for that function.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. This means your effective stroke range is 55 to 75 mm. You set the exact end-position required for your machine and lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.