verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X75-50S

The AirTAC SEJ Adjustable Cylinder SEJ50X75-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 25–75mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke75 mm
  • Adjust window50 mm
  • Effective stroke25–75 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$94.67 $102.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X75-50S

The AirTAC SEJ50X75-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm bore and a 75mm nominal stroke. A rod exits both ends, ensuring the annulus area is identical in both directions. The extruded aluminum barrel contains no external tie rods, guaranteeing true ISO 15552 dimensional interchangeability.

The defining feature is the 50mm adjustable stroke window. A stop screw on the back rod lets you mechanically shorten the retract end, dialing the effective stroke down from 75mm to a minimum of 25mm. This is ideal for commissioning fine-tuning or matching a stop precisely without changing hardware. The rear rod can also carry a cam or flag for external tracking. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors.

Airtac SEJ Adjustable Cylinder SEJ50X75-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X75-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke75 mm
Adjustment window50 mm (25–75 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X75-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×75Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X75-50S Is Used

precision_manufacturing

Packaging Stop Fine-Tune

Provides 825 N of both-way force to drive a packaging flap folder, using the 50mm retract dial to perfectly match varying carton heights during changeovers.

straighten

Press Brake Backgauge

Delivers 1154 N at 0.7 MPa to position a sheet metal backgauge, using the 25-75mm effective stroke range to dial in the exact bend line without swapping hardware.

tune

Dispenser Trial Positioning

Handles precise fluid dispenser nozzle height with equal thrust both ways, mechanically adjusting the end point up to 50mm to test different fill volumes on the fly.

Is the Airtac SEJ Adjustable Cylinder SEJ50X75-50S the Right Cylinder?

Confirm this 50mm bore fits your load, delivering 825 N each way at 0.5 MPa. If you need less force, the 40mm bore provides 528 N both ways; if you need more thrust, step up to the 63mm bore for 1402 N both ways at 0.5 MPa. If your application never requires end-position changes after commissioning, a fixed-stroke SED cylinder is sufficient. For matching an ISO 15552 replacement, verify the 75mm stroke, 50mm window, PT1/4 port, and your mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable air cushion decelerates the load near stroke ends but does not function as a fail-safe lock; a plain SEJ will not hold position on air loss, so consider a BSED or external rod lock for fail-safe requirements.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X75-50S FAQ

A stop screw on the back rod mechanically shortens the retract stroke. With the 50mm adjustment window, you can dial the effective stroke down from 75mm to a minimum of 25mm, allowing you to set the exact end position on the machine and lock it in place.

Because the rod exits both ends, force is equal in both directions. It delivers 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X75-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X75-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.