
The AirTAC SEJ Adjustable Cylinder SEJ63X250-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 230–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X250-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable stroke window, letting you dial the retract end from 230 mm up to 250 mm. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers an equal force of 1402 N each way at 0.5 MPa, eliminating the thrust differential found in single-rod units.
You adjust the stroke via a stop screw on the back rod, locking it after setting your exact end position. The extruded aluminum barrel has no external tie rods, operating at 30-800 mm/s with field-adjustable air cushions at both ends. This -S variant includes a magnet for CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X250-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 20 mm (230–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dialing the 20 mm retract window lets you fine-tune a 1962 N press fit depth at 0.7 MPa on assembly lines without swapping physical spacers.
The 230-250 mm adjustable stroke accommodates varying pallet heights in a machining cell, using the equal both-way 1402 N force to push and pull loads.
Set a precise mechanical stop on a conveyor sorting line; the back rod stop screw holds firm against 286 kgf max loads while the locknut secures the position.
Verify this 20 mm window covers your positioning tolerance, giving a 230-250 mm effective range. If you need less force, the 50 mm bore provides 825 N at 0.5 MPa; if you need more, stepping up to the 80 mm bore yields 2268 N at 0.5 MPa. If your machine never requires end-position tuning, a fixed-stroke SED saves complexity. For stroke lengths of 250 mm or more, use external guides to manage side loads. Remember, the air cushion decelerates the load near stroke end but does not hold position on air loss; use an external rod lock for fail-safe holding. ISO 15552 dimensional interchangeability ensures it drops into existing setups matching the 63 mm bore, PT3/8 port, and mounting footprint.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. For this SEJ63X250-20S model, you can adjust the effective stroke anywhere from 230 mm up to 250 mm, then lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and reaches a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.