Airtac TACE Guided Compact Cylinder TACE80X25
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X25 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke25 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X25
The AirTAC TACE80X25 is a double acting, non-rotating compact cylinder built to ISO 21287: an 80 mm bore with a 25 mm stroke, a 20 mm hard-chrome-plated S45C rod and a 1/4" PT port. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical peak of 512.6 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is what lets it fit tight jigs and gantry frames.
For real work, plan on roughly 1508 N of usable push at 0.5 MPa (about 0.6 of the rated force); expressed vertically, the 80 mm bore lifts about 128 kg with a 2:1 margin, so match your part weight to that number. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the rod end carries a female M12x1.75 thread. This version has no magnet fitted - order the optional -S code if you want CMSE or DMSE switches for end-of-stroke sensing. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
Airtac TACE Guided Compact Cylinder TACE80X25 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X25 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X25
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X25 Is Used
Bracket press fixture
A 25 mm stroke is ideal for clamping a steel automotive bracket before a coining or staking hit; the twin-guide yoke keeps the punch square to the die without a separate guide post.
Casting lift between CNC stations
With about 128 kg of vertical lift at a 2:1 margin, the 80 mm bore raises aluminium die castings from a pallet to a machining fixture, and the short body fits inside the gantry guard.
Pallet squaring pusher
On a heavy pallet conveyor, 2513.3 N of push at 0.5 MPa squares loaded pallets against a stop before wrapping; the twin guide rods stop the push plate twisting under side load.
Is the Airtac TACE Guided Compact Cylinder TACE80X25 the Right Cylinder?
Between the 63 mm bore (1558.6 N push at 0.5 MPa) and the 100 mm bore (3927.0 N at 0.5 MPa), the 80 mm TACE80X25 sits in the heavy-clamping and lifting band where a 25 mm stroke is enough to clamp, press or index. If the load must stay put when air is lost, add a rod lock or a pilot check valve - the piston drifts once pressure drops. Match the frame with FB flange, CA/CB clevis, CR or FTC mounting, and add the optional -S magnet only if CMSE / DMSE position switches are planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X25 FAQ
At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N. At 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. Supply air filtered to 40 um, run the rod at 30-500 mm/s, and keep pressure within 0.15-1.0 MPa (22-145 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames. A fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. This version ships without a magnet - order the optional -S code to enable CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.