Airtac TACE Guided Compact Cylinder TACE80X35
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X35 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X35
With air pressure extending and retracting the rod, the TACE80X35 is a double acting, non-rotating compact cylinder in the ISO 21287 short-body format. Its 80 mm bore delivers 2513.3 N push and 2356.2 N pull at 0.5 MPa, rising to 3518.6 N push at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight machine frames, guards and gantries.
In practice, plan for roughly 1508 N of real work at 0.5 MPa (about 60% of the push rating), enough to lift about 128 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, the 20 mm S45C hard-chrome rod carries a female M12x1.75 thread, and the 1/4" port serves this bore. The piston drifts if air is lost, so add a rod lock or pilot check valve wherever a load must stay put. This code has no magnet; order the optional -S version to enable CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE80X35 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X35 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X35
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X35 Is Used
Clamp fixture on a CNC machining pallet
The usable 1508 N at 0.5 MPa clamps steel workpieces in a machining fixture, and the twin-guide yoke keeps the clamp pad square to the part without an external guide.
Marking head over a warehouse pallet line
A short 35 mm stroke drives a stamp or ink marker down onto pallet tops; the vertical-lift equivalent of about 128 kg covers heavy stamping heads with margin.
Push-off diverter on a packaging conveyor
The non-rotating plate pushes cartons sideways off a bottling line, and the short ISO 21287 body fits under the guard rail where a full-length cylinder will not.
Is the Airtac TACE Guided Compact Cylinder TACE80X35 the Right Cylinder?
If 2513.3 N of push at 0.5 MPa is more than the job needs, the 63 mm bore gives 1558.6 N in the same compact format; if the load demands more, step up to the 100 mm bore at 3927.0 N. Because the piston drifts when air is removed, fit a rod lock or pilot check valve for any held load. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and the optional -S code adds the magnet that CMSE / DMSE switches require - without it no sensor can be read. Strokes for this bore run to 300 mm as standard, so 35 mm sits well inside the range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X35 FAQ
At 0.5 MPa the 80 mm bore pushes with 2513.3 N and pulls with 2356.2 N. At 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N, and the theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed runs 30-500 mm/s, and air must be filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options include FB flange, CA/CB clevis, CR and FTC. This code has no magnet, so order the optional -S version to run CMSE or DMSE switches, and confirm outline dimensions from the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.