Airtac TACE Guided Compact Cylinder TACE80X45S
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X45S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 45mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke45 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X45S
The TACE80X45S is a double acting, non-rotating compact cylinder built to ISO 21287: an 80 mm bore with a 45 mm stroke, a 20 mm hard-chrome-plated S45C rod ending in a female M12x1.75 thread, and 1/4" PT ports. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical peak of 512.6 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames, guards and gantries where a full-length cylinder will not fit. For real-world sizing, plan on roughly 1508 N of usable push at 0.5 MPa, and for vertical work that equates to about 256 kg at full rating - or about 128 kg with a 2:1 margin. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped into the body slots. A fixed TPU bumper at each end absorbs end-of-stroke shock; the unit runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C.
Airtac TACE Guided Compact Cylinder TACE80X45S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X45S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X45S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X45S Is Used
Bushing press-fit station
A 45 mm stroke covers the short travel of pressing bronze bushings into gearbox housings on an automotive machining line; 2513.3 N of push at 0.5 MPa handles light press work, and the twin-guide yoke keeps the arbor square to the bore.
Carton lid hold-down
On a case-packing machine, the non-rotating twin rods press a lid flat while glue sets, and the short ISO 21287 body tucks under a low guard where a longer profile cylinder would not clear the frame.
Conveyor stopper gate
A pop-up stopper on a pallet conveyor needs side-load stiffness more than long travel; the 80 mm yoke carries the side thrust, the -S magnet feeds a CMSE switch to confirm the gate is up, and the 1/4" port keeps response quick.
Is the Airtac TACE Guided Compact Cylinder TACE80X45S the Right Cylinder?
Comparing bores: the 63 mm version of this series delivers 1558.6 N push at 0.5 MPa, while the 100 mm bore reaches 3927.0 N - this 80 mm model sits between them with 2513.3 N push and 2356.2 N pull, a strong match for medium-duty pressing, clamping and lifting at a 45 mm stroke. Note that the piston drifts if air is lost, so it never locks or holds a suspended load on its own; add a rod lock or pilot check valve where position must be kept. Mounting options are FB flange, CA/CB clevis, CR and FTC, and because the -S magnet is fitted on this unit, CMSE or DMSE switches can be added for end-of-stroke or mid-stroke sensing without any rework.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X45S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N; the theoretical maximum is 512.6 kgf at 1.0 MPa. The 80 mm bore drives a 20 mm rod with a female M12x1.75 thread, supplied through 1/4" PT ports, and the rod extends and retracts under air - it is double acting throughout.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock. This -S version carries the magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots; speed range is 30-500 mm/s and temperature spans -20 to +70 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.