Airtac TACE Guided Compact Cylinder TACE80X5S
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X5S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X5S
Built as a double acting, non-rotating compact cylinder, the AirTAC TACE80X5S pairs an 80 mm bore with a 5 mm stroke in an ISO 21287 short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and fixtures a full-length bore cannot. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical 512.6 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide.
Plan for roughly 1508 N of real work at 0.5 MPa (about 0.6 of the push figure), which is a vertical lift of about 128 kg with a 2:1 margin. The hard-anodized aluminium body carries a 20 mm hard-chrome S45C rod with an M12x1.75 female thread, fed through 1/4" PT ports. This -S model carries the optional magnet, so CMSE or DMSE switches can be mounted; speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi) with a fixed TPU bumper at both ends.
Airtac TACE Guided Compact Cylinder TACE80X5S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X5S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X5S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X5S Is Used
Fixture clamp on a CNC machining centre
A 5 mm strike is enough to swing a clamp arm onto an aluminium housing; the 2513.3 N push at 0.5 MPa holds it while the cutter runs, and the twin-guide yoke stops the arm twisting under side load.
Plug press on a bottling line
Seating a stopper into a bottle neck needs only a short strike, so the 5 mm stroke plus 3518.6 N push at 0.7 MPa does the job without a long body blocking the machine guard.
Pallet lift on an automotive assembly line
The 80 mm bore lifts about 128 kg vertically with a 2:1 margin, enough to raise a pallet fixture 5 mm for a transfer step; a CMSE switch on the fitted magnet confirms the up position.
Is the Airtac TACE Guided Compact Cylinder TACE80X5S the Right Cylinder?
For this force class the 80 mm bore sits between the 63 mm (1558.6 N push at 0.5 MPa) and the 100 mm (3927.0 N push at 0.5 MPa); if your clamp needs under about 1500 N of working force, the smaller bore saves air and cost. The piston drifts when air is lost, so add a rod lock or pilot check valve for a held load. FB flange, CA/CB clevis, CR and FTC mountings suit the compact body, and the fitted -S magnet lets CMSE or DMSE switches report end positions on the 5 mm stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X5S FAQ
At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it reaches 3518.6 N push and 3298.7 N pull, with a theoretical maximum of 512.6 kgf at 1.0 MPa. Air must be filtered to 40 um, and the 5 mm stroke sits well inside the 300 mm standard range for this bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. A fixed TPU bumper at each end absorbs end-of-stroke energy, FB flange and CA/CB clevis mountings are available, and because this is the -S version the magnet is fitted, allowing CMSE or DMSE reed or solid-state switches. It runs at 0.15-1.0 MPa (22-145 psi) and -20 to +70 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.