Airtac TACE Guided Compact Cylinder TACE80X70
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X70 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke70 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X70
The TACE80X70 is a double acting, non-rotating compact cylinder built to ISO 21287, pairing an 80 mm bore and 70 mm stroke with a 20 mm S45C hard-chrome rod inside a hard-anodized aluminium body. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N on the extend stroke at 0.7 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight weld fixtures and gantry frames a full-length body cannot reach. A fixed TPU bumper at each end absorbs end-of-stroke energy. As a working rule, plan on about 1508 N of real force at 0.5 MPa, and with a 2:1 margin this cylinder lifts about 128 kg vertically. The magnet is the optional -S code; order it only if you want CMSE or DMSE switches.
Airtac TACE Guided Compact Cylinder TACE80X70 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X70 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X70
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X70 Is Used
Bracket staking press
A 70 mm stroke gives the travel to seat staked bushings in automotive bracket assemblies, with 2513.3 N at 0.5 MPa enough for light press-fit work and the twin-guide yoke keeping the punch square to the part.
Machining fixture clamping
Clamps heavy cast-iron housings against a CNC fixture; the non-rotating guide rods hold the clamp pad flat under side load, and the short body fits inside the fixture guard envelope.
Palletizing lift head
Lifts about 128 kg castings vertically with a 2:1 margin on a palletizing cell, while the 70 mm stroke raises the part clear of the conveyor lane.
Is the Airtac TACE Guided Compact Cylinder TACE80X70 the Right Cylinder?
At 2513.3 N push at 0.5 MPa, the 80 mm bore sits between the 63 mm bore (1558.6 N) and the 100 mm bore (3927.0 N), so pick 80 mm when 63 mm is under-rated but 100 mm is oversized for the frame. It does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve for a suspended load. Mounting choices are FB flange, CA/CB clevis, CR and FTC; the yoke carries no rod-thread code, and the rod end is female M12x1.75 with a 1/4" PT port. Specify the -S magnet code only when position sensing with CMSE / DMSE switches is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X70 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N; the theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, and speed 30-500 mm/s over the 70 mm stroke.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures and guarded frames. A fixed TPU bumper at both ends absorbs end-of-stroke energy. Mount it with FB flange, CA/CB clevis, CR or FTC hardware. Position sensing needs the optional -S magnet code, which enables CMSE / DMSE switches; without -S no magnet is fitted, so no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.