Airtac TACE Guided Compact Cylinder TACE80X90
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X90 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X90
The TACE80X90 is a double acting, non-rotating ISO 21287 compact cylinder: air extends and retracts the 20 mm rod, while twin guide rods on a yoke stop the tooling rotating and carry side load. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so an 80 mm bore fits tight press fixtures and gantries where a full-length cylinder will not.
Plan on roughly 1508 N of usable force at 0.5 MPa (about 0.6 of the push rating), which lifts about 128 kg vertically with a 2:1 margin - enough to match a real pallet or fixture weight before you order. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, a fixed TPU bumper absorbs end-of-stroke energy at both ends, and the 1/4" port feeds speeds of 30-500 mm/s. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), temperature -20 to +70 C. No magnet is fitted; order the optional -S code if CMSE / DMSE switches are planned.
Airtac TACE Guided Compact Cylinder TACE80X90 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X90 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X90
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X90 Is Used
Riveting press on a compact machine bed
2513.3 N of push at 0.5 MPa drives a riveting or stamping die, and the twin guide yoke keeps the punch square to the part without an external guide.
Pallet lift-assist column
With about 128 kg of vertical lift at a 2:1 margin, the 90 mm stroke raises loaded tote pallets on an assembly line, and the short body fits the column footprint.
Heavy slide gate on a packaging line
The non-rotating twin rods push a heavy divertor gate across a conveyor at 30-500 mm/s, holding alignment shift after shift.
Is the Airtac TACE Guided Compact Cylinder TACE80X90 the Right Cylinder?
This 80 mm bore sits between the 63 mm unit (1558.6 N push at 0.5 MPa) and the 100 mm unit (3927.0 N push at 0.5 MPa), so pick it for heavy clamping or lifting in the 1500-2500 N band. If the load must stay put when air is lost, add a rod lock or pilot check valve - the piston drifts without one. Mount with FB flange, CA/CB clevis, CR or FTC to suit the fixture; the rod end is a female M12x1.75 thread and ports are PT. Add the optional -S magnet only when CMSE / DMSE position feedback is actually needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X90 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N; the theoretical maximum is 512.6 kgf at 1.0 MPa. Speed range is 30-500 mm/s through a 1/4" port, with operating pressure 0.15-1.0 MPa (22-145 psi) and proof pressure 1.5 MPa (215 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. Position sensing requires the optional -S magnet code - without it no magnet is fitted, so order -S to enable CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.