Airtac TN Double Axis Double Rod Cylinder TN10X100SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X100SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X100SH
The TN10X100SH is a double-acting twin-rod cylinder: two pistons drive two parallel rods fixed to one shared plate, so the plate carries the load without rotating and resists bending and twisting. With a 10 mm bore and a 100 mm stroke it delivers about 78.5 N of push thrust at 0.5 MPa, and the external bumper at the front both cushions impact and adjusts the effective stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the enterprise-standard TN specification with PT thread ports. A position-detection magnet is fitted as standard on every TN cylinder, with magnetic-switch slots around the body. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X100SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X100SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore sets the thrust: this 10 mm bore gives about 78.5 N push at 0.5 MPa and runs at 0.2-1.0 MPa; step up to 16/20/25/32 mm bores when you need more force. TN is the enterprise-standard series with PT thread only - if you need G or NPT thread or higher non-rotating precision, choose the JIS-standard TR series instead. Strokes are chosen from the bore's table; keep strokes proportionate to the bore and watch cover clearance on short cylinders. For long strokes on a small bore, route the side-load check to us and we will confirm against the datasheet curves.
Applications
Conveyor stopper
Mounted beside the line, the plate rises square against the leading carton to stop it at a gate or sensor position without rotating.
Fixture clamp
The twin rods press a workpiece into a machining fixture; the shared plate clamps flat and will not twist under the holding load.
Small lift stage
Twin rods raise a compact lift plate or transfer gantry and keep it level through the full 100 mm stroke.
FAQ
What thread does the TN10X100SH use, and can I get G or NPT?
The TN series is supplied with PT thread ports only. G and NPT options are available on the JIS-standard TR twin-rod series, which also adds a precise guide-grade design with higher non-rotating accuracy.
Do the twin rods stop the load from rotating?
Yes. Two parallel rods on one shared plate resist bending and twisting, so the load mounts to the plate without rotating. Allowable side-load is published as curves, not single numbers, so confirm it with us from the datasheet.