Airtac TN Double Axis Double Rod Cylinder TN10X15SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X15SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X15SH
The TN10X15SH is a double-acting twin-rod cylinder whose two parallel rods carry a shared mounting plate, so the load rides without rotating while the assembly resists bending and twisting. The 10 mm bore produces a theoretical push thrust of 78.5 N at 0.5 MPa across the twin-rod assembly (pull side lower), and the 15 mm stroke fits short, precise moves. An external front bumper cushions impact and adjusts the effective stroke over -5 to 0 mm.
This is a genuine AirTAC part from the TN enterprise-standard series, with PT thread ports and the magnet fitted as standard; switch slots surround the body. It runs on 40 um-filtered air at 0.2-1.0 MPa (29-145 psi), -20 to 70 C, 30-500 mm/s. Confirm any suffix detail on this code with us - we will read the full code against the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X15SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X15SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
This code decodes to the TN enterprise-standard series, bore 10 (78.5 N push at 0.5 MPa), 15 mm stroke, PT thread - the TN series offers PT only, so step to TR if you need G or NPT ports or the precise-guide JIS grade. Keep the stroke within this bore's table and be cautious about over-long strokes beyond what the front cover is designed for. For side-load or mounting questions, route them to us for confirmation from the datasheet.
Applications
Fixture clamp on a machining jig
The twin rods keep the clamp pad parallel as it closes, and the adjustable bumper sets the final clamp position within 5 mm of full stroke.
Lift-assist for light palletizing heads
The non-rotating plate lifts small trays or product stacks level; the magnet feeds position signals to the controller at both ends of the 15 mm stroke.
Indexing stopper in a rotary dial
The twin-rod plate actuates as a stable stop that squares parts against a fixture, resisting the twist that a single-rod unit would see under offset contact.
FAQ
What does the stroke number in TN10X15SH mean, and is 15 mm my only option?
The 15 after the X is the stroke in millimetres. Bore 10 is offered across a table of standard strokes, so you can order a longer or shorter travel in the same bore - just stay within the bore's listed stroke range and watch the caution against over-long strokes.
Why pick a twin-rod cylinder over a single-rod one here?
The two rods on a shared plate stop the load from rotating, resist bending and twisting, and let you bolt the workpiece straight on. That makes this 10 mm bore ideal for pushers, clamps and stoppers where the face must stay square. Overall dimensions for your exact stroke come from the datasheet on request.