Airtac TN Double Axis Double Rod Cylinder TN10X25S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X25S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X25S
Twin-rod cylinders run two parallel guide rods on a single end plate so the mounted load travels straight without rotating, giving real resistance to bending and twisting. This AirTAC TN10X25S combines a 10 mm bore with a 25 mm stroke for a theoretical push thrust of 78.54 N at 0.5 MPa (the pull figure is lower). A bumper pad at the front both cushions impact and trims the effective stroke across a -5 to 0 mm range.
This is a genuine AirTAC component built to enterprise standard with PT porting. Every unit carries a magnet as standard, with switch slots machined around the body. We provide exact dimensions and sizing data from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X25S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X25S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 10 mm bore delivers a theoretical push force of 78.54 N at 0.5 MPa; pull is lower due to rod area. Use bore 10 for lighter-duty push and clamp jobs. The TN line is enterprise standard with PT threads only. For JIS-standard fitment with a lengthening sliding guide that raises non-rotating precision, choose the TR series instead. Stroke 25 mm sits within the bore 10 stroke table. Avoid over-long strokes relative to cover length; confirm allowable side-load curves with us before finalizing your selection.
Applications
Strip-feed guide
Pushes a thin metal strip laterally to align it with a press feed line; twin rods keep the pusher face square so the strip tracks straight.
Gate transfer
Shifts a small gate or diverter flap between two lanes on a packaging machine, holding position without rod rotation under repeated cycling.
Lift pin ejector
Lifts a small pin or plug out of a test socket on an assembly line; the dual-rod design keeps the ejector from tilting and jamming.
FAQ
Is the magnet optional on this model?
No. Every TN twin-rod cylinder ships with a magnet fitted as standard; switch slots are machined around the body. There is no non-magnetic variant to choose.
Can this cylinder handle side loads?
Twin rods give better resistance to bending and twisting than a single-rod unit, but allowable side-load is published only as curves. Contact us to confirm the load is within limits for your stroke.