Airtac TN Double Axis Double Rod Cylinder TN10X25SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X25SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X25SH
A twin-rod design places two guide rods on a shared plate so the load translates without rotating, giving solid resistance to bending and twisting forces. This AirTAC TN10X25SH pairs a 10 mm bore with a 25 mm stroke, producing a theoretical push thrust of 78.54 N at 0.5 MPa on the push side (pull is lower). The front bumper cushions impact at end of stroke and adjusts the effective travel over a -5 to 0 mm range.
This is a genuine AirTAC part manufactured to enterprise standard with PT thread ports. A magnet is standard on every cylinder, with slots for magnetic switches around the body. We confirm exact dimensions and application sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X25SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X25SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 10 mm targets lighter thrust applications; the theoretical push force is 78.54 N at 0.5 MPa and pull is lower. Operating pressure for this bore is 0.2 to 1.0 MPa (29-145 psi). The TN series is enterprise standard with PT threads only; the TR series offers JIS standard, a precise sliding guide with higher non-rotating accuracy, and PT, G, or NPT thread options. Stroke 25 mm is within the bore 10 range. Keep the stroke reasonable relative to the cover to manage side-load; confirm allowable side-load curves with us before ordering.
Applications
Label applicator
Presses a label pad onto a product surface at a fixed angle; twin rods prevent the pad from yawing so the label lands flat every time.
Pallet stopper
Rises to stop a lightweight pallet or tray on a roller conveyor, then retracts below the rollers to let it pass; anti-rotation keeps the stop face level.
Sensor mount lift
Raises a proximity sensor bracket into reading position above a moving part, then lowers it for changeover; the guide rods keep the sensor plane fixed.
FAQ
Why choose TN over the TR series?
TN follows enterprise standard with PT threads only. TR follows JIS standard, adds a lengthening sliding guide for higher non-rotating accuracy and lower rod-end deflection, and offers PT, G, or NPT threads plus two port groups on both sides.
What are the dimensions and weight?
Overall dimensions depend on the stroke, and weight varies accordingly. We provide exact figures from the datasheet on request rather than quoting a single spec value.