Airtac TN Double Axis Double Rod Cylinder TN10X45S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X45S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X45S
The TN10X45S is a double-acting twin-rod cylinder: two parallel rods on one shared plate give resistance to bending and twisting and let the load mount without rotating. With a bore 10 and 45 mm stroke it produces 78.5 N of push thrust at 0.5 MPa (the push side is higher than the pull side), and an external bumper pad cushions impact while adjusting the stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the ENTERPRISE-standard TN series, running on air filtered to 40 um at 0.2-1.0 MPa (29-145 psi) and -20 to 70 C at 30-500 mm/s. The magnet is standard on every TN model, with magnetic-switch slots around the body. Dimensions for this stroke are per the datasheet; we confirm sizing and details on request.
Airtac TN Double Axis Double Rod Cylinder TN10X45S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X45S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 10 provides 78.5 N push thrust at 0.5 MPa; move up to bore 16/20/25/32 for higher force. TN is the enterprise-standard series with PT ports only; if you need the precise guide grade, G or NPT threads, or bore 6, choose the JIS-standard TR series instead. The 45 mm stroke is in the bore 10 table, but keep strokes reasonable for this short-cover series; route side-load questions to us.
Applications
Divert pusher
Pushes small cartons or parts onto a takeaway lane, with the twin-rod plate staying square so parts are not dragged sideways.
Indexing stopper
Rises into the path of small pallets or fixtures to stop them at a station, resisting twist from off-center contact.
Light lift assist
Raises small fixtures or lids a short 45 mm in a compact station, both rods sharing the load to resist tipping.
FAQ
How much thrust does the TN10X45S bore 10 cylinder give me?
The theoretical push thrust for bore 10 is 78.5 N at 0.5 MPa, with the push side higher than the pull side. Operating pressure for this bore is 0.2-1.0 MPa (29-145 psi). For other pressure points or pull-side figures, use the datasheet curves.
What port thread does the TN10X45S have, and can I get G or NPT?
This model has M5x0.8 ports and, like the whole TN enterprise series, is available with PT thread only. If you need G or NPT threads, select the JIS-standard TR twin-rod series in the same bore.